Alesis Strike Amp 8 MK2 2000 Watt Powered Drum Monitor

w/ Bluetooth

SKU: 16STRIKEAMP8MK2

WAS $589.00
RRP $589.00
NOW $560.00
SAVE 5%!
Sale Ends in
23:59 pm, 24 December 2024
Share:
  • GOLD COAST MUSIC
  • Out Of Stock
  • SYDNEY WAREHOUSE
  • 5+ In Stock
  • (Orders dispatched in 1 to 3 business days from Sydney)



(Orders dispatched in 1 to 3 business days from Sydney)

Alesis Strike Amp 8 MK2 is a 2000 watt active speaker for electronic drum kits with Bluetooth® connectivity, 8″ woofer + 1″ HF compression driver, 2 combo XLR + 1/4″ inputs, and XLR mix output.




Alesis Strike Amp 8 MK2 2000 Watt Powered Drum Monitor

Powerful Partner for Electronic Drums
The Alesis Strike Amp 8 MK2 is a powerful bi-amped speaker designed specifically for electronic drums. With a power output of 2000 watts, it provides plenty of headroom for almost any performance or rehearsal. The robust 8-inch woofer and 1-inch high-frequency compression driver are tuned for smooth frequency response across the spectrum, providing the most accurate and authentic representation of the instrument's acoustic and electronic drum sounds. The Strike Amp 8 MK2's performance is very good, with a maximum sound pressure level of 132 dB and a frequency range of 44 Hz to 20 kHz. It's wide enough to deliver the full punch of a kick drum to the crystal-clear crackle of a snare or hi-hat.

All the Connections You Need - including Bluetooth
The Strike Amp 8 MK2 features two combo XLR and 1/4-inch combo inputs for connecting electronic drum kits or multi-pad instruments, each with independent volume controls. You can also wirelessly connect your mobile device to the Strike Amp 8 MK2 via Bluetooth, allowing you to stream music wirelessly during rehearsals or during set breaks. There's also an XLR output for chaining multiple speakers together or sending a signal from the Strike amp to your front-of-house mix.

Adapts to Any Stage or Room
On stage or in a rehearsal room, the low frequencies of different instruments compete with each other can easily create a dense, muddy sound you don't want. Strike Amp 8 MK2 features an HPF EQ switch that quickly filters out distracting frequencies to make your tone fit perfectly into your mix. Unwanted electrical noise can also be a common problem. The Strike Amp 8 MK2's ground lift switch can eliminate hum caused by ground loops.

Road-Ready Lightweight Design
The Strike Amp 8 MK2 is rugged yet lightweight and easy to carry (15.7kg), making it easier than ever to load it up for gigs or rehearsal rooms. The Strike Amp 8 MK2 can be used in its intended wedge position, but its versatile design also makes it especially useful in an upright or pole-mounted positions, making it easier to direct sound where you need it, especially where outdoor performances and other locations where PA backlines are restricted.

Features

  • Powerful, Professional Sound 2000 watts of peak power ensures you have enough headroom for almost any live performance or rehearsal
  • Precision-Tuned for Electronic Drums The cabinet design, 8” woofer, and 1” HF compression driver are designed to deliver a full and realistic reproduction of acoustic and electronic drum sounds
  • Bluetooth® Enabled Stream music wirelessly from your mobile device into Strike Amp 8 MK2’s dedicated Bluetooth® channel
  • All the Connectivity You Need Two combo XLR + 1/4" inputs with independent volume controls and an XLR direct mix output allow for chaining multiple speakers or sending your mix to front-of-house
  • Quickly Adapts to Venues and Rooms Strike Amp 8 MK2 has a ground lift switch for eliminating noise issues caused by ground loops and a HPF EQ switch to help cut through muddy stage mixes
  • Lightweight, Flexible and Sturdy Weighing just 21 lbs. / 9.53 kg, Strike Amp MK2 is rugged yet easy to transport and can be used in a wedge, upright, or pole-mounted position

Specifications

  • Output Power 2000 W
  • Drivers Low-Frequency: 8.0” (203 mm) driver, 2.0” (50 mm) high-temperature voice coil. High-Frequency: 1.0” (25 mm) exit ceramic driver with 1.4” (35 mm) coil.
  • Crossover Frequency 2 kHz
  • Maximum SPL 130 dB (peak) dB-SPL @ 1 m
  • Frequency Response 62 Hz – 20 kHz (+/-3 dB)
  • Frequency Range 52 Hz – 20 kHz (-10 dB)
  • Horn Coverage 90° horizontal x 60° vertical (nominal)
  • Connectors (2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced) (1) XLR output (Link) (1) IEC power cable input
  • Input Impedance Line: 10 KΩ balanced, 20 KΩ unbalanced
  • Gain/Volume Control Range -∞ to 0 dB, +4 dBu nominal, +10 dBu for max output
  • HPF Switch 100 Hz
  • Bluetooth Version: 5.0 Profile: A2DP, AVRCP Codec: SBC Range: up to 100 feet (30.5m)
  • Power Connection: IEC Input Voltage: 100-120V, 50/60 Hz; 220-240V, 50/60 Hz Consumption: 1100W Fuse: T15AL AC250V; 220-240V T6.3AL AC250V
  • Protection Electronic clip, thermal, and transducer overdrive protection
  • Mounting/Installation Standard 36 mm pole socket
  • Operating Temperature 14°F to 113°F (-10°C to 45°C)
  • Product Dimensions(width x depth x height) 256 mm x 245 mm x 436 mm
  • Weight 9.5 kg

Specifications

  • Output Power 2000 W
  • Drivers Low-Frequency: 8.0” (203 mm) driver, 2.0” (50 mm) high-temperature voice coil. High-Frequency: 1.0” (25 mm) exit ceramic driver with 1.4” (35 mm) coil.
  • Crossover Frequency 2 kHz
  • Maximum SPL 130 dB (peak) dB-SPL @ 1 m
  • Frequency Response 62 Hz – 20 kHz (+/-3 dB)
  • Frequency Range 52 Hz – 20 kHz (-10 dB)
  • Horn Coverage 90° horizontal x 60° vertical (nominal)
  • Connectors (2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced) (1) XLR output (Link) (1) IEC power cable input
  • Input Impedance Line: 10 KΩ balanced, 20 KΩ unbalanced
  • Gain/Volume Control Range -∞ to 0 dB, +4 dBu nominal, +10 dBu for max output
  • HPF Switch 100 Hz
  • Bluetooth Version: 5.0 Profile: A2DP, AVRCP Codec: SBC Range: up to 100 feet (30.5m)
  • Power Connection: IEC Input Voltage: 100-120V, 50/60 Hz; 220-240V, 50/60 Hz Consumption: 1100W Fuse: T15AL AC250V; 220-240V T6.3AL AC250V
  • Protection Electronic clip, thermal, and transducer overdrive protection
  • Mounting/Installation Standard 36 mm pole socket
  • Operating Temperature 14°F to 113°F (-10°C to 45°C)
  • Product Dimensions(width x depth x height) 256 mm x 245 mm x 436 mm
  • Weight 9.5 kg
SKU 16STRIKEAMP8MK2
Barcode # 694318026212
Brand Alesis

Be The First To Review This Product!

Help other Gold Coast Music users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought


Sale
Roland PM-03 Personal Drum Monitor

$344.00 $349.00

Sale
Roland V-Drums TD-07DMK Electronic Drum Kit

$1,139.00 $1,169.00


More From This Category


Sale
NU-X NXDA30BT 30W Electric Drum Kit Amplifier

$331.00 $339.00

Sale
Roland PM-03 Personal Drum Monitor

$344.00 $349.00

Yamaha MS45DR DTX 2.1 Drum Monitor System

$499.00 6% off RRP

Sale
Roland PM-100 80W Personal Drum Monitor Amp

$547.00 $559.00

Roland PM-200 180W Personal Drum Monitor Amp

$819.00 18% off RRP