PreSonus Quantum 4848 24-bit 192 kHz Thunderbolt Audio Interface w/ Studio One Pro

PreSonus Quantum 4848 24-bit 192 kHz Thunderbolt Audio Interface w/ Studio One Pro

Designed for the needs of the recording professional, the Quantum 4848 is the perfect solution to take your analog gear into the digital domain. Equipped with 32 inputs and outputs of DB25 line-level connectivity and pristine digital conversion with 120 dB of dynamic range, the Quantum 4848 allows you to bring vintage and boutique analog gear into your DAW at blazingly fast speed thanks to its near-zero-latency Thunderbolt™ interface. 16 additional channels of ADAT Optical I/O let you tie in digital gear, and you can expand your simultaneous I/O to 192 channels. The included Studio One® Professional DAW features Pipeline XT, allowing you to use your analog gear as plug-ins inside your Studio One session.

With the Quantum 4848, your audio interface is an integrated extension of your recording environment. Rear panel DB25 line-level I/O makes connecting your Quantum 4848 to your existing analog patchbay a breeze. With 32 channels of inputs and outputs at sample rates up to 192 kHz, you can route audio from your vintage gear and analog recording console to your DAW and back in pristine quality, capturing every nuance of your boutique equipment. Integrating digital gear is facilitated by 16 channels of ADAT I/O. For a full compliment of 48 channels of conversion, you can simply add two DigiMax DP88s via the 16 ADAT channels. A true Thunderbolt device, up to 4 Quantum 4848 interfaces can be stacked to create a 192x192 system—or combine the Quantum 4848 with Quantum and Quantum 2 interfaces to add PreSonus’ recallable XMAX Class A high-headroom preamps.

Studio One Professional’s Pipeline XT plug-in lets you insert hardware processors into your Studio One session with automatic latency compensation. Once inserted, Pipeline XT functions just like any other plug-in effect, allowing you to drag and drop it from one channel to the next or change the insert order. Every design decision during Quantum’s engineering was made with one goal in mind: speed. Quantum sports high-speed Thunderbolt connectivity and a no-frills, direct-to-DAW architecture that was designed to transport your audio to and from your DAW with an imperceptible amount of latency. Cutting-edge 24-bit, 192 kHz converters with 120 dB of dynamic range ensures the fidelity of your audio as it moves to the digital domain.

Some DAWs limit your I/O access when you use third-party audio interfaces. The Quantum 4848 resolves this issue by providing three Channel Profile modes that allow you to adapt the input and output channel configuration when the application you’re using limits you to 32 inputs and outputs or less. Set the Quantum 4848 to use 32 analog inputs with 16 channels of ADAT, 24 analog inputs with 8 channels of ADAT, or 16 analog inputs with 16 channels of ADAT to customise the assortment of analog and digital inputs and better accommodate your needs. And if you get tired of limiting your available inputs, launch Studio One Professional to record up to 192 simultaneous inputs, mix and master your sessions all from the same software.

Audiophile-grade digital converters and low-jitter clocking create a superior recording and listening experience. The Quantum audio interface operates at up to 192 kHz for ultra-high-definition mixing and recording. High-quality converters on every input and output provide 120 dB of dynamic range to capture complex musical harmonics smoothly and naturally with no audible distortion. BNC word clock I/O and low-jitter clocking ensure the Quantum 4848 and other digital audio devices operate in tight sync for superior imaging.

Features

• 48x48 ultra-low-latency 24-bit 192 kHz Thunderbolt™ 2 audio interface
• 32 line-level inputs and outputs via rear-panel DB25 connectors
• Dual ADAT inputs and outputs for 16 channels of digital I/O at base sample rates.
• Stack up to four Quantum 4848 interfaces via Thunderbolt for 192x192 simultaneous inputs and outputs
• Stack any combination of four Quantum, Quantum 2, and Quantum 4848 interfaces via Thunderbolt to create a custom system
• Studio One® Professional DAW software and Studio Magic Plug-in Suite included
• Native Studio One Pipeline XT plug-in provides integration of analog processors
• Free UC Surface touch-control software control of many parameters
• Simultaneous I/O up to 48 inputs/48 outputs
• 32 line-level inputs and outputs via rear-panel DB25 connectors
• ADAT Optical/Dual SMUX inputs/outputs: 16x16 channels at 44.1 or 48 kHz; 8x8 channels at 88.2 or 96 kHz
• Dual Thunderbolt ports for stacking multiple units and connecting Thunderbolt peripherals
• Thunderbolt 2 high-speed bus
• 24-bit resolution and up to 192 kHz sampling rate
• 120 dB A/D/A converters
• BNC word clock input and output with low-jitter clocking
• Rugged construction with all-metal chassis
• 1U rack-mountable
• 12 VDC, 5A external power supply (included)